Technical Operation

 

A. The control panel records water quality, and automatically activates to adjust and quantity to stabilize the water as required.

 

B. The cistern pump is controlled by the AX Water Management Center, and will provide a water flow at the designated pressure and flow rate.

 

C. The water passes through a particle separator, where centrifugal force separates large solids from the water. Solids are automatically purged to the sanitary drain via a control valve.

 

D. Water enters a filter housing that removes remaining particles (oil and particulate) five microns or larger.

 

E. The water is then sent through an ultraviolet disinfection system.

 

F. Upon exiting, the water passes through a 3-way valve. During no-flow conditions, the water is circulated back to the cistern. During periods of demand, the water is routed through a water meter and on to a cooling tower make-up water system; irrigation system; toilet system; or other non-potable application.

 

G. Subsequent control modules will further refine water quality for intended purpose, at point of use.